Movie Maker Studio & Tour

“Studio and WWI Scenery”

for FSX

Introduction: First, I would like to thank you for downloading this freeware project. It is a fictional airlines based on “Real World” places. Where possible, I’ve tried to stay as true to the photographs I had available. The “Thank You”(s) for this project are numerous. However, I would like to thank…….

Tom Constantine of http://www.theoldhangar.net/ for providing a sounding board and a great place for enthusesist to gather.

Arno Gerretsen of http://www.fsdeveloper.com/scenery/ for wonderful tools and providing guidance not directly but through the forum.

Todd Lucas of http://www.margaritaair.com/ for a wonderful place in the sun

Reddog - Beta Tester and for putting up with missed deadlines.

Mikrco - For the animated flags found thoughout this scenery and for use of his other works (models) in the past.

Hcornea - of http://www.fsdeveloper.com for making available at a wonderful freeware wind turbine

Oregon Coast at http://www.oregon-coast.net/Mesh/index.htm for making some great models available to developers of scenery and aircraft.

Archive3ED and all the artist that make their work readily available. Thank you…..

ScruffyDuck for ADE an airport design utility

Stuart Green - for creating and providing fantastic WWI and WWI aircraft.

Dave Eckert - A true craftsman and creator of Camel04

Pegasus Aviation Design - for creating my favorite plane the Foker Dr.1

Copyright:

All files contained within this download are given to you free of charge. However, they are protected by copyright laws Internationally. The “Movie Maker Studio and Tours” packages may not be uploaded to any other site without my written permission. My work is not for profit and non commercial and may NOT be sold or repackaged in any way.

 

Any duplication, reproduction, partial or complete of any material made by me is totally forbidden without prior authorization from the author. Material from this download may NOT be used or included in payware packages of any kind including freeware without written permission by the author. The only exception is the including of a complete library or object as a part of a freeware scenery package. However, the library may not be broken apart and must be included in whole. I do not give any warranties, either implied or specific. Any damage to your computer, programs or files resulting from the use of this or any other package I’ve created is not my responsibility. Any use is at your own risk.


All company logos and/or trademarks utilized in the production of this scenery package are copyrighted by their respective owners. They are depicted here as artists presentations for illustrative purposes only. If you use the files or services of this site in violation of the above statement, you may be in violation of local and federal laws.


Any and all wrongful use of these files will open yourself to prosecution to the full extent of the law. By downloading anything from this site, you are stating that you have read, understand and agree to the terms of our copyright statement.


By Downloading and installing this scenery package you accept this copyright agreement!

 

End Users License Agreement (EULA):

THIS LICENSE AGREEMENT SHALL BE GOVERNED BY THE
LAWS OF THE UNITED STATES OF AMERICA, STATE OF WEST VIRGINIA

AND SHALL INURE TO THE BENEFIT OF MOCAT OR ITS ASSIGNS.

DISCLAIMER / LIMITATION OF LIABILITY:
THE USER ACKNOWLEDGES THAT THE SOFTWARE MAY NOT BE
FREE FROM DEFECTS AND MAY NOT SATISFY ALL OF THE USER’S
NEEDS. THERE ARE NO WARRANTIES IMPLIED OF ANY KIND, THIS

PRODUCT IS FREEWARE AND IS GIVEN TO THE FLIGHTSIM COMMUNITY AS IS. THE SOFTWARE AND ANY ACCOMPANYING WRITTEN
MATERIALS ARE LICENSED "AS IS". IN NO EVENT WILL MOCAT BE LIABLE

FOR DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGE

OR DAMAGES RESULTING FROM LOSS OF USE, OR LOSS OF
ANTICIPATED PROFITS RESULTING FROM ANY DEFECT IN THE
PROGRAM, EVEN IF IT HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. SOME LAWS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR
LIABILITIES FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY.

SPECIFIC RESTRICTIONS:
IN ACCORDANCE WITH THE COMPUTER SOFTWARE RENTAL
ACT OF 1990, THIS SOFTWARE MAY NOT BE RENTED, LENT OR
LEASED.

KNOWN PROBLEMS:

REQUIRED:

1. Microsoft FSX

SPECIAL NOTE:

Manual Installation:

1. Unzip the downloaded zip file MMS1.zip

2. You will find:

A. Self Installer.

B. Re-paints.zip

C. AI_Aircraft.zip

D. HTML Read-Me Folder.

3. Run the “Self Installer and when it says “Browse to your main FSX Installation” Don’t. Browse to a temporary folder.

4. Once installed you’ll find the folder, “Addon Scenery”

5. Copy the Addon Scenery Folder to your Main FSX installation.

-----Now Go to Installation Instructions----

Installation:

STEP 1 - From the main FSX screen Click on Settings as pictured below

STEP 2 - Click on Scenery Library.

 

 

 

STEP 3 - Add the folder Movie Maker Lib Obj

Step 4. Add the folder Movie Maker Tours

 

Important Note: Make sure the priorities are shown as above….

Settings: The scenery was designed with default settings for scenery, with the exception of Scenery Complexity…which I have set as high as possible….

The setting which has the largest effect upon display is Mesh Complexity…to high the mountains may cover part of the seaplane dock…to low….and they may not connect with the land…

Here’s the settings I use…

That’s it…….Go Fly!

The Sceneries:

There are three airports in this package….

KWHP - Whiteman Airport, Los Angeles, CA. This is Movie Maker Studios main base of operation. It includes the airport and Studio Scenery.

KTLR - Mefford Field Airport, Tulare, CA. This is the main support base for the WWI movie Set.

1Q1 - Eckert Field Airport, Strathmore, CA. This is the WWI Scenery. It’s broken down into 5 areas, the airstrip, the British sector, French sector, US Sector, and Crew Area.

Re-Paints.

There are four re-paints included in this package. These aircraft fly the Movie Maker colors. Copy the texture folder to the appropriate aircraft and make the changes to the A/C configure file. In addition, I’ve included a BMP of the logo. If you’d like to do additional repaints feel free.

Installation instructions for re-paints are included in each re-paint file.

AI_Aircraft:

There are 8 aircraft used in the AI. Two are the default Lear and C172. The others are from great freeware authors Dave Eckert, Frank Elton, and Stuart Green. Most of the aircraft can be found at the major flightsim sites.

1. Albatross by Stuart Green

2. Caudron G4 by Stuart Green

3. Foker Dr.1 by Frank Elton

4. Snipe by Stuart Green

5. Spad by Stuart Green

With special repaint of the Rickenbacker by Brian Hill

6. Sopcamel2004 by Dave Eckert.

The directions for installation of AI Aircraft is included in the AI aircraft folder.

FLIGHTS - Didn’t do them this time….needed the space. You should be able to find each of the sceneries with the information provided above!

I hope you enjoy this scenery…..as much, as I enjoyed creating it.

If you have any problems or questions you can reach me by private message at:

The Old Hangar MoCat daily

FSDeveloper mocat404 (not very often)

Simulation Out House MorrisTheCat daily

FS Northwest MoCat daily

Vintage ATC MoCat weekly

Margartia Air MoCat daily

And/or

Mocat404@hotmail.com

Enjoy…….and happy Flying

 Chris “MoCat” Carel