07/02/2012Hits: 8
FS2004/FSX - Quick Reference Chart For Flying Aircraft. This is an easy to read Excel spreadsheet that is an ILS approach checklist that starts when you receive landing clearance by ATC that you are approximately 70 miles out from your assigned ILS runway. By utilizing this checklist you will ensure not to forget any of the steps necessary for a successful ILS landing. By William R Ayers.
20 Kb
07/02/2012Hits: 9
FS2004 - Emirates Boeing 777-200LRauthentically replicates the aircraft used for these non-stop routes. Details include proper weight/ballance, weight specs, engine specs, and aerodynamics. Read the text docs for more details. Textures by David Grindele. Sound by Luke Hogan. Panel by Marco Spada. Real world flight/engine dynamics and data by Douglas E. Trapp.
45,3 MB
07/02/2012Hits: 12

FSX - Cleveland Burke Lakefront Airport (KBKL), Ohio (OH). This was made using Google sketch up 8, Airport Facilitator X and Instant Scenery 2. Burke Lakefront Airport is a general aviation airport located next to Lake Erie in Cleveland, Ohio. I have made custom 3D buildings using Google sketch up for the airport. All the buildings have photo textures to make it closer to real life. I also put static aircraft on the ramp, airport vehicles and more fuel trucks. I added more parking and fuel spots. I also made a parking lot full of cars. If you choose to start off at a DOCK gate, you will start off inside one of the custom hangars. Starting off or taxiing inside of a hangar will cause a crash (unless you have crashes turned off). I also added a helipad located near the FBO. I have also included the aviation high school, that is located at the northeast, and boats that are right next to it in the water. There will be more objects at the airport if your scenery complexity is set to normal (such as vehicles, aircraft, and fuel trucks). Tower veiw is from the roof of the control tower. This was all made based on Google Earth satellite imagery and Bing Maps. There are no night textures for the custom buildings. These will be added in a future version. Please read the readme for instructions on how to install. The instructions are not the same to how you would normally install. By Tyler Lawrence.
7,5 MB
07/02/2012Hits: 7
FSX - Victoria International Airport(CYYJ). This airport was made using Airport Design Editor. Victoria International Airport is an airport located in Victoria, British Columbia, Canada. It has scheduled airline flights for a few airlines. Includes all the default buildings and more accurate ones. Also includes the main terminal with two jetways, the general aviation and the terminal in the correct locations. At the general aviation there are static aircraft and aircraft hangars. If you choose to start at the DOCK gate, you will start off in the hangar. To the west are helipads that are used for military. Also includes the aviation museum that is located to the southeast. Google Earth and Bing maps were used for the airport. By Tyler Lawrence.
7 MB
07/02/2012Hits: 4
FSX - Hawaii Airfield Locator. This file adds airfield markers and ICAO ID's found in FSX, and overlays them on Google Earth. This file is for Hawaii (HI), USA. There is also a seperate file with a list of basic airfield location details. By Carl Vokes.
600 Kb
07/02/2012Hits: 9
FS2004/FSX - ILS Approach Checklist. This is an easy to read Excel spreadsheet that is an ILS approach checklist that starts when you receive landing clearance by ATC that you are approximately 70 miles out from your assigned ILS runway. By utilizing this checklist you will ensure not to forget any of the steps necessary for a successful ILS landing. By William R Ayers.
20 Kb
07/02/2012Hits: 12
SX - GA-TL1 Longsword Fighter. The GA-TL1 is the primary A/X strike fighter of the UNSC. This model features an opening door and the ability to travel at 2,000 KIAS+. V2, which will have a full VC is under development. By Josh Wagstaff
11.8 MB
07/02/2012Hits: 5
FSX - Manchester-Boston Regional Airport. This airport was made using Airport Design Editor 9x (ADE9x). Manchester Boston Regional Airport is an airport located in Manchester, New Hamshire (NH). This replaces all the stock building with more accurate ones. It also adds more gates at the terminal A cargo gates to the southwest. At the cargo area are added cargo buildings and cargo trucks. At the main terminal are jetways and more gates. At the general aviation area are static aircraft and more parking. This is based on Google earth and Bing maps. By Tyler Lawrence.
12,3 MB
07/02/2012Hits: 8

FSX - Sao Tome And Principe DeLuxe. FSX flights and scenery. Sao Tome and Principe, officially the Democratic Republic of Sao Tome and Principe, is a Portuguese-speaking island nation in the Gulf of Guinea, off the western equatorial coast of Central Africa. It consists of two islands: Sao Tome and Principe, located about 140 kilometres (87 miles) apart and about 250 and 225 kilometres (155 and 140 miles), respectively, off the northwestern coast of Gabon. Both islands are part of an extinct volcanic mountain range. New landclass and airports in Sao Tome and Principe, coastal towns and ports, private airfields at the sugar refineries and complete printed instructions of the freight and passenger routes for pilots who would like to engage their services in Africa. These islands will keep you busy for a week or more. Several lots for sale at Sao Tome International for investor who can grasp the possibilities of a new air service. South African Airways now has a weekly flight... gosh what a nice place at night is spectacular specially if you have women passengers... By Gera Godoy Canova.
9 MB
05/02/2012Hits: 50
FS2004/FSX - Continental Airline Boeing 737-300FS2004/FSX - Continental Airline Boeing 737-300
7 MB